A controller bigger than your head

The reports of Retro Scan’s death are greatly exaggerated.

I just emerged from the other side of a huge house move that taxed my body and soul. Moving my huge collection was very difficult, and now dealing with where to put it all keeps that stress going. I feel behind on lots of things, but it’s time to catch up. One of the best ways to do that is with a new Retro Scan. So here we go — let’s talk trackballs.

As far as I know, the first arcade video games to use a trackball were Midway’s Shuffleboard and Atari Football, both from 1978. As to which came first, I have no idea at the moment.

Atari really ran with the trackball (they called it a “Trak-Ball”) and produced several mega arcade hits that used the interface, including Missile Command and Centipede. It only makes sense that they would bring the tech home to their Atari 8-bit computer line — and the Atari 5200, as seen here — in the form of the Pro-Line Trak-Ball controller.

(An aside: Despite the ad saying the Trak-Ball controller works for the Atari 2600, I know of no vintage 2600 games that support trackball mode natively. There is a joystick mode switch on the bottom of the controller, however, that lets you use it with any game.)

Of course, the 5200 version of the Trak-Ball controller is legendarily huge. It’s almost as big as the (already big) console itself. But I’ve heard good things about it, despite never having used one. I do have the smaller CX22 Trak-Ball controller and I enjoy games of Missile Command on my Atari 800XL with it from time to time, although it is criminally under-supported (in Trak-Ball mode) by games on that platform.

So how about you guys: Have you ever used the Atari 5200 Trak-Ball? What did you think about it?

Discussion Topic: Have you ever used a trackball with any game console? Tell us about it.

I’ve been playing around with making my own custom joysticks recently. Just yesterday, I built this Atari VCS-compatible unit you see above using a Sanwa arcade joystick assembly and two Sanwa arcade buttons, both of which are available on Amazon.

I also used an old Bud project box from my late father’s things for the housing, some screw-in rubber feet on the base, a cord from a non-working Atari CX40 joystick, and some scrap steel inside to give the stick more weight and heft.

I built it mostly so I could have a 4-way only joystick for maze games on the Atari 800. (The Sanwa joystick is switchable between 4-way and 8-way upon installation.) The result is absolutely incredible either handheld or set on a table, and my high score in Nibbler has gone through the roof.

On this joystick, both buttons do the same thing, although my next Atari model will probably have three buttons — one for fire, one for up, and one for down so I can play Asteroids on the 800 like a pro.

If I were riding a flying ostrich, I’d probably be smiling too.

I don’t normally take scans out of context, but I made an exception for this amazing illustration. It comes from the instruction manual for Joust for the Atari 2600. I isolated the image years ago for possible use in one of my Halloween costume ideas posts, and I’ve been staring at it in my scans folder ever since.

Joust is one of my favorite arcade titles, and I’m particularly fond of the Atari 7800 home version.

I’d like to find out who created this glorious piece of video game art. I’ll do some digging in a bit, but if you know already, please leave a comment and I’ll update this post. (The illustrator may be referenced in the manual itself, but it’s packed where I can’t get to it.)

By the way, I think this illustration would look awesome on a t-shirt. Anybody want to make one?

Discussion Topic of the Week: Which is better: Joust or Balloon Fight?

The carpet pretty much looked like that even when it was clean.

Here’s a retro-flavored Polaroid instant photo I took of my bedroom floor some point in 1995. I was 13 or 14 at the time, and I had just received a stack of Beatles CDs (upper center-left) the previous Christmas — along with my first CD player, integrated in boombox form, which can be seen seen in the upper right portion of the photo.

But I’m not posting this photo because of Beatles CDs. On the floor sit a number of retrogaming consoles and accessories: to the left is an Atari 5200 console, and in the lower right you can see a ColecoVision and the corner of an Intellivision. There are also a few Atari joysticks, a copy of Yars’ Revenge for the 2600, and three copies of Intellivision Donkey Kong.

[ Continue reading [ Retro Scan of the Week ] Fixing My ColecoVision Expansion Module #1 on the Bedroom Floor, 1995 » ]